The current ripple rate indicates the proportion between the AC component and the DC component of the inductor.In DC-DC topology circuits, the inductor component is the most crucial. Among the various parameters of the inductor during circuit design, the current ripple rate r is the most fundamental and influential parameter. It signifies the ratio of AC component to DC component in the inductor

Smooth and Rounded: Weld points should be smooth and rounded, free from defects such as burrs, pores, recesses, and flux stains.Uniform Solder Wetting: Weld points should exhibit uniform solder wetting, exposing the metal framework without solder heap formation.

To meet the demand for DDR5 inductors from end customers, GOTREND introduces a new low-loss series, pairing the GSTL-SERIES with the GSTD-SERIES scheme, achieving high performance, reliability, and lower costs, providing robust support for DDR5.

GSFT-Series molded power inductors have the best performance / volume ratio, cost / performance ratio, and are very suitable for PMIC applications that require small size ( within 1.4 x 1.2 x 0.65 mm ) switching power supplies, whether single-phase or multi-phase.

GOTREND invites everyone to turn off their lights for one hour on March 23rd at 8:30 PM local time, advocating for behavioral changes in daily habits. Together, let's create a low-carbon sustainable living environment and contribute collectively towards environmental conservation.

A current sensor is a device that converts a large current in the primary coil into a smaller current in the secondary coil, establishing a current ratio. The signal is converted into an analog voltage or current signal, or it can be a digital signal, and the signal can be connected to the test instrument display, and then controlled by the sensing device, called a current sensor.